How to make a emphasize seams wallcovering
1- Prepare the seams
1- Prepare the seams
3- Apply the paste with a roll or a paste brush on the wall, covering the whole surface of the first drop (up to the vertical line).
4- Apply the wallcovering on the wall and following the vertical line with the edge of the wallcovering.
5- Eliminate all air bubbles with a smooth brush form the center to the edges.
6-Cut the extra wallcovering with a cutter, at the top and the bottom of the wall.
7- Apply the paste with a roll or a paste brush on the wall, covering the whole surface of the following drop (up to the vertical line).
8- Apply the wallcovering on the wall and following the vertical line with the edge of the wallcovering.
9-Cut the extra wallcovering with a cutter, at the top and the bottom of the wall.
10- Eliminate all air bubbles with a smooth brush form the center to the edges.
11-Cut the extra wallcovering with a cutter, at the top and the bottom of the wall.

Hollow joints

Installer Hanging Tips

More information

Hollow joints

Installer Hanging Tips

These instructions can be applied to any straw wallcovering  (Collections Eclat, Robinson, Nature précieuse, Luxury walls, Paille Japonaise et Talisman). All our products are delivered with complete and detailed hanging instructions. Also available on our website. We recommand that the installation should be done by a professionnal or an experienced wallcovering hanger.

BEFORE HANGING
Please check the delivery, particularly the lengths, reference and colour and that it corresponds to your order. Prepare the wall (fill any holes or cracks), dry, solid and free of dust.