Hanging pleated textile wallcoverings
1- Draw a vertical line with a level that you will use as a guide to place the edge of the wallcovering.
2- Use a special adhesive for wall textiles and glass-textile fabrics
3- Apply the wallcovering on the wall and following the vertical line with the edge of the wallcovering.
Eliminate all air bubbles with a smooth brush form the center to the edges.
5- Cut the extra wallcovering with a cutter, at the top and the bottom of the wall.
6-Apply the paste with a roll or a paste brush on the wall, covering the whole surface of the following drop (up to the vertical line).
7-Apply the wallcovering on the wall and following the vertical line with the edge of the wallcovering.
8-Apply the wallcovering on the wall and following the vertical line with the edge of the wallcovering.
9- Eliminate all air bubbles with a smooth brush form the center to the edges.
10- Adjust drops edge to edge
11- Cut the extra wallcovering with a cutter, at the top and the bottom of the wall.

Wallcoverings in pleated textiles

Installer Hanging Tips

More information

Wallcoverings in pleated textiles

Installer Hanging Tips

These instructions can be applied to any of our pleated textile wallcovering  (Collections Opulence, Geisha and Alliances). All our products are delivered with complete and detailed hanging instructions. Also available on our website. We recommand that the installation should be done by a professionnal or an experienced wallcovering hanger.

BEFORE HANGING
Please check the delivery, particularly the lengths, reference and colour and that it corresponds to your order. Prepare the wall (fill any holes or cracks), dry, solid and free of dust.