Draw a vertical line appearing the edge of the drops.
Draw a vertical line appearing the edge of the drops.
Draw a vertical line appearing the edge of the drops.
For last width to cover which is lower than the width of the wallcovering, apply the width to be covered on the back of wallcovering then proceed to cutting using a square, a rule and a cutter.
For last width to cover which is lower than the width of the wallcovering, apply the width to be covered on the back of wallcovering then proceed to cutting using a square, a rule and a cutter.
For last width to cover which is lower than the width of the wallcovering, apply the width to be covered on the back of wallcovering then proceed to cutting using a square, a rule and a cutter.
Proceed to the cutting of the drops using a square, a rule and a cutter.
Use a paste for fabric wallcoverings and apply it with a roll or a paste brush on the wall, covering the whole surface of the first drop (up to the vertical line).
Apply the wallcovering on the wall and following the vertical line with the edge of the wallcovering.
Eliminate all air bubbles with a smooth brush form the center to the edges.
Apply the wallcovering on the wall and following the vertical line with the edge of the wallcovering.
Eliminate all air bubbles with a smooth brush form the center to the edges.
Apply the wallcovering on the wall and following the vertical line with the edge of the wallcovering.
Cut the extra wallcovering with a cutter, at the top,the bottom and the side of the wall.
Eliminate all air bubbles with a smooth brush form the center to the edges.
Cut the extra wallcovering with a cutter, at the top,the bottom and the side of the wall.
Cut the extra wallcovering with a cutter, at the top,the bottom and the side of the wall.

Wallcoverings in thin bark

Installer Hanging Tips

More information

Wallcoverings in thin bark

Installer Hanging Tips

All our products are delivered with complete and detailed hanging instructions. Also available on our website. We recommand that the installation should be done by a professionnal or an experienced wallcovering hanger.

BEFORE HANGING
Please check the delivery, particularly the lengths, reference and colour and that it corresponds to your order. Prepare the wall (fill any holes or cracks), dry, solid and free of dust.

DROPS PREPARATION
1- Measure the height and width of the wall to calculate the number of drops.
2 - Using a level, trace a vertical line appearing the edge of the drops.
3- Apply the height of the wall on the back of wallcovering and proceed to the cutting of the drops using a square, a rule and a cutter.
4- For last width to cover which is lower than the width of the wallcovering, apply the width to be covered on the back of wallcovering then proceed to cutting using a square, a rule and a cutter.